If you are planning to do something where a laser level is required, you should purchase the Best Laser Level for DIY.
Whether you have to stud a wall or install the tiles, an accurate result is required which is not possible with human eyes (only). The human eyes are not much accurate. Even a small mistake will lead the project to destruction. A laser level is used for perfect alignments.
It can help you while you are installing cabinets, decorating your house, fixing its lights, or fencing a border around it. From commercial work to a household job, a laser level is used for leveling purposes.
There is no rocket science in using a laser level. These laser levels are user-friendly and can be used by any non-technical person. There are hundreds of laser levels available on the internet, all of them are good at there work. These laser levels are differing by their features and cost.
A laser level with more features will be expensive than others. We created a list of best laser levels for Diy after discussing with experts, analyzing user’s feedbacks, and testing different products.
The laser levels that are complicated to use, much expensive, and have low quality are not included in this list. The best laser levels are given below with their details, features, advantages, and disadvantages.
Best Laser Level For DIY in 2021 Reviews & Comparison Table:
ABS & Plastic
1. Firecore F112R Laser Level:
The first and foremost is the Firecore F112R laser level. It is a three-beam cross-leveling laser level. It is easy to use as you can control its three-beam lines through a button located at the control penal. These two lines can be projected jointly or independently. Firecore F112R is protected by an IP55 rating.
This laser level is waterproof, dustproof, and shake-proof. Doesn’t matter whether it is warm outside or raining heavily, you can use Firecore F112R at any weather condition. This professional laser level has an accuracy rate of 1/8th an inch at 30 ft. It has a working range of up to 42 ft.
This laser level can be used with the pivot magnetic brackets (included) providing a way to use it for various applications. If you don’t want to use pivot magnet then no worries, you can go with a tripod (not included) due to the availability of 1/4″- 20 and 5/8″-11 threads on it.
This red line laser level is equipped with both manual and self-leveling modes. The self-leveling feature works within a 4-degrees angle. The laser beam will slowly flash if inclination exceeded from this limit.
Firecore F112R Features:
- In manual leveling mode, the beam will flash continuously after every 5 seconds. This feature keeps the user aware of the manual leveling mode. So that user could be able to switch the mode if he had selected this mode mistakenly.
- A magnetic bracket is included in the original purchase. If you are not comfortable with it, you can also use a tripod. This tripod has to be bought separately.
- The laser projected from the Firecore F112R laser level is visible at 42 feet. This means you can take accurate alignments of all objects present between 42 feet of distance from the laser level.
- Firecore F112R Laser level is water and dust-resistant. You can use this laser level in every kind of environment, temperature, and weather conditions.
2. Bosch GLL 30 Laser Level:
Bosch GLL 30 laser level comes with the horizontal line and vertical line beams. It also has a cross-leveling feature for square alignments. It is mostly used for household jobs. Bosch GLL 30 can project a long laser that is visible up to 30 ft.
The accuracy rate of this laser level is 5/16″. The smart pendulum system not only levels it automatically but also indicated the out-of-level conditions. This makes self-leveling more accurate. The smart pendulum is locked automatically when the laser level is powered off.
Bosch GLL 30 has compatible thread (1/4″). All mounting tools with this thread can be used easily.
The MM2 flexible mounting tripod (included) allows you to adjust its height and clamp it to other surfaces. A few of Bosch GLL 30 laser level’s features are given below.
Bosch GLL 30 Features:
- The MM2 tripod is flexible and adjustable. It can be clamped on any surface having a thickness of ½ inch to 2-1/4 inch. A smooth surface is not required for this tripod. You can adjust this tripod on multiple surfaces.
- The smart pendulum system provides auto self-leveling and indicates out-of-level conditions. This pendulum makes transportation easier.
- This laser level is ideal for tiling, studding, and hanging objects. Due to its limited range, it can’t be used for outdoor and large works.
- This is the best laser level for Diy due to the availability of cross-leveling. The cross-leveling is helpful in the alignment of square elements. These square elements include pictures, mirrors, tiles, and much more.
3. DEWALT DW088K Laser Level:
Another best laser level for Diy is the Dewalt DW088K cross-leveling laser level. The laser projected from Dewalt DW088K (either vertical or horizontal) has an indoor range of 100 feet and a working range of up to 165 feet using the detector.
The accuracy of the laser line is 1/8th an inch at 30 ft. The Pulse mode is also there which is responsible for increasing its brightness and working distance. A control penal is located on one side of Dewalt DW088K. You can turn on/off any beam using a button. How simple it is.
A tripod is also included in the original purchase that is responsible for holding the laser level stably. A built-in magnetic pivoting base can help you in attaching the laser level with the metal surface.
Dewalt DW088K laser level works correctly in all environmental conditions. It is IP54 rated laser level that is resistive to water and debris. Want to know a bit more about its features? Read its main features given below.
DEWALT DW088K Features:
- The laser level’s body doesn’t let any particle enter into it. It is suitable even in the rain, storm, and dusty environments. The more resistive it is, the longer it survives.
- A DW0881T laser tripod is used for mounting. However, a magnetic base that is integrated into the system is responsible to mount it on the ceiling, window, and other metals.
- While working indoor, it projects 100 feet long visible laser. This range is extended using a laser detector. You are not required to use a laser detector when you have to work within 100 feet. You can purchase a separate laser detector for a large project.
- It is user-friendly and easy to use as a control penal is available on it. You can switch between line modes using this penal.
4. BLACK & DECKER BDL170 Laser Level:
Black & Decker BDL170 laser level projects the vertical and horizontal lines. Its mentionable feature is Bull’s eye auto-leveling which levels this laser level automatically. No adjustment is required for this.
This laser level is equipped with a backlight to increase its visibility. Black & Decker BDL170’s external body is completely covered with rubber to ensure its additional protection. This laser level is used to hang different objects.
Black & Decker BDL170 laser level is limited for small works. It can only be attached to the wall using a wall mount (included). This wall mount holds the laser tightly when attached to the wall. It is flexible. It can be adjusted easily.
Two AAA batteries provide extended time for many hours so that you could be able to work continuously without interruption. This laser level has a 2-year limited warranty. The features of this laser level are given below.
BLACK & DECKER BDL170 Features:
- A wall mount is used to attach this laser level with any surface especially the wall. This may help you while hanging pictures, mirrors, and shelves. It is mostly used in the decoration of special events.
- It comes with Bull’s-eye auto-leveling. This feature levels it automatically and quickly. Leveling becomes more accurate and easy with this feature.
- Black & Decker laser level is safe to use. It is safe and protected even when fallen at the ground. This is due to its outer rubber layer.
5. Qooltek 050-009 Laser Level:
Last but not least one is Qooltek 050-009 multi-purpose laser level. From simple woodwork to a budding a wall, a measuring tape is required. This 8-feet measuring tape is available with this laser level.
It projects 3-beam laser lines. You can switch modes using a top button by switching up and down. Three bubble vials are also available in it. These bubble vials include vertical, horizontal, and a 45-degrees bubble vial.
A standard metric ruler is also integrated at its bottom. A 12cm screwdriver is also included in the purchase. It has an accuracy rate of +2mm to -2mm at 10m and 25m. It is the best laser level for Diy due to affordable rates. A few of Qooltek 050-009’s features are listed blown
Qooltek 050-009 Features:
- It is the cheapest laser level of our list but still providing professional features. You can switch between vertical, horizontal, and cross-line modes.
- Qooltek 050-009 is easy to operate. You can switch between line-modes using a button located at the top & you have to press up and down to select any line mode according to your choice. You will see a laser control switch at its one side & turn this laser level on/off using that switch.
- It has an accuracy rate of ±2mm per 10mm and 25mm. It is not much accurate but still good for house use.
This list will help you in finding the best laser level for Diy. The whole selection depends upon your budget and working requirements. I recommend you to go for Dewalt DW088K.
You can purchase Qooltek 050-009 if you have a low budget. I hope this article will help you in finding the best laser level. If you have any queries, feel free to contact us.